• Automatic dosing from 0.1 to 1%, whether a pre-mix flow rate of 50 to 1,000 l/mn (BP) or 35 to 350 l/mn (AP)
• Pump 10 l/mn (BP at 20 bar) or 3.5 l/mn (AP at 40 bar) with pneumatic valves
• Regulation with electric motor proportional to water flow
• Selection of concentrations by touch
• Added safety: Pre-mixing takes place at the truck level, therefore away from the dangerous area. The maintenance of humidifying/foaming additives disappears, as reserves are placed from the vehicle's design.
• Greater effectiveness (advantage of water with additives): Additives can be used on two types of fire in order to improve the speed of extinction and reduce water consumption (damage caused by runoff water is greatly reduced). Unlike certain mechanical devices, the Triton pre-mixes after the water pump, so the latter does not need to be washed at the end of the intervention.
• Simplicity and speed of intervention: The Triton is started by pressing the ON/OFF button. The + and – taps allow a simple and quick selection of the desired additive concentration (0.1 to 1% – per 0.1% step). Triton injects the additive from the opening of a projection device and in proportion to the water flow. The Triton does not require any washing at the end of the intervention because only the establishments must be washed. At any time, the user can check the Triton's operation by pressing the Start button.
• No loss of pressure connected to the Triton: Unlike a classic proportioner, the Triton allows important establishment lengths without any loss of pressure, as the pre-mixing is carried out on the truck and conveyed to the installations via the pump of water.
